Zeus PTFE (Teflon) Heat Shrink Tubing, 24 Gauge, 0.006" Wall, Shrink Rat 2:1 48" Length

Zeus PTFE (Teflon) Heat Shrink Tubing, 24 Gauge, 0.006" Wall, Shrink Rat 2:1 48" Length Reviews

Other Picture

Zeus PTFE (Teflon) Heat Shrink Tubing, 24 Gauge, 0.006" Wall, Shrink Rat 2:1 48" Length Feature

• Tensile Strength 2,500 to 4,000 psi
• Maximum continuous operating temp. 500 F
• Excellent Chemical Resistance
• Clear View
• Lubricious Finish

This PTFE Heat Shrink 2:1 Tubing has a shrink range of 650 F +/- 25 F (343 C +/-10 C). PTFE (Polytetrafluoroethylene) goes into the gel state (amorphous to crystalline) at approximately 625 F (330 C). PTFE begins to shrink at 650 F (343 C). The mandrel or part to be covered by the Heat shrink tubing must be able to withstand this temperature range. Color: Clear.

Visit Store Now !!

Detail Products

• Zeus PTFE (Teflon) Heat Shrink Tubing, 14 Gauge, 0.008" Wall, Shrink Rat 2:1 48" Length
• Zeus FEP Heat Shrink Tubing, 20 Gauge, 0.008" Wall, Heat Shrink Rat 1.3:1 48" Length
• Zeus PTFE (Teflon) Heat Shrink Tubing, 20 Gauge, 0.006" Wall, Shrink Rat 2:1 48" Length
• Zeus FEP Heat Shrink Tubing, 2 Gauge, 0.0 12" Wall, Heat Shrink Rat 1.13:1 48" Length
• Zeus PTFE (Teflon) Heat Shrink Tubing, 26 Gauge, 0.006" Wall, Shrink Rat 2:1 48" Length

Detail Reviews

Oct 08, 2011 00:30:05

Zeus FEP Heat Shrink Tubing, 1 Gauge, 0.0 12" Wall, Heat Shrink Rat 1.13:1 48" Length

Zeus FEP Heat Shrink Tubing, 1 Gauge, 0.0 12" Wall, Heat Shrink Rat 1.13:1 48" Length Reviews

Other Picture

Zeus FEP Heat Shrink Tubing, 1 Gauge, 0.0 12" Wall, Heat Shrink Rat 1.13:1 48" Length Feature

• Tensile Strength, psi at 73 Deg F 3,000 - 4,000
• Elongation at 73 Deg F .300 percent
• Specific Gravity 2.12 - 2.17
• Shrink ratio is 1.3 to 1
• Maximum continuous operating temp. 500 F

This heat shrinkable FEP (Fluorinated Ethylene-Propylene) Tubing will shrink rapidly over inserted objects upon exposure to moderate heat. Soldered joints, parts, components and fittings of plastic, metal or wood that could not previously be protected because of the high temperature required for shrinkage can now have a transparent surface of Teflon with a continuous service temperature of 400 F (204 C). Shrinkage will occur completely at exposure to 350 F (177 C) with partial shrinkage beginning as low as 200 F (93 C). Suggested for connecting metal, glass or plastic tubes of similar or dissimilar diameters in low pressure applications. FEPs chemical resistance and dielectric properties are equal to PTFE (Polytetrafluoroethylene).

Visit Store Now !!

Detail Products

• Zeus FEP Heat Shrink Tubing, 0 Gauge, 0.0 12" Wall, Heat Shrink Rat 1.13:1 48" Length

Detail Reviews

Oct 02, 2011 23:20:04

Zeus PTFE (Teflon) Heat Shrink Tubing, 20 Gauge, 0.006" Wall, Shrink Rat 2:1 48" Length

Zeus PTFE (Teflon) Heat Shrink Tubing, 20 Gauge, 0.006" Wall, Shrink Rat 2:1 48" Length Reviews

Other Picture

Zeus PTFE (Teflon) Heat Shrink Tubing, 20 Gauge, 0.006" Wall, Shrink Rat 2:1 48" Length Feature

• Tensile Strength 2,500 to 4,000 psi
• Maximum continuous operating temp. 500 F
• Excellent Chemical Resistance
• Clear View
• Lubricious Finish

This PTFE Heat Shrink 2:1 Tubing has a shrink range of 650 F +/- 25 F (343 C +/-10 C). PTFE (Polytetrafluoroethylene) goes into the gel state (amorphous to crystalline) at approximately 625 F (330 C). PTFE begins to shrink at 650 F (343 C). The mandrel or part to be covered by the Heat shrink tubing must be able to withstand this temperature range. Color: Clear.

Visit Store Now !!

Detail Products

• Zeus PTFE (Teflon) Heat Shrink Tubing, 24 Gauge, 0.006" Wall, Shrink Rat 2:1 48" Length
• Zeus PTFE (Teflon) Light Wall Tubing 20 Gauge 100' Length Coil or Spool
• Zeus PTFE (Teflon) Heat Shrink Tubing, 18 Gauge, 0.006" Wall, Shrink Rat 2:1 48" Length
• Translucent Amber PEEK Tubing, 12 AWG, 0.084" ID, 0.087" OD, 0.0015" Wall, 72" Length

Detail Reviews

Sep 27, 2011 01:26:06

Stainless Steel 316 Hypodermic Tubing, 14 Gauge, 0.083" OD, 0.067" ID, 0.008" Wall, 36" Length

Stainless Steel 316 Hypodermic Tubing, 14 Gauge, 0.083" OD, 0.067" ID, 0.008" Wall, 36" Length Reviews

Other Picture

Stainless Steel 316 Hypodermic Tubing, 14 Gauge, 0.083" OD, 0.067" ID, 0.008" Wall, 36" Length Feature

• Drawn
• Full Hard Temper
• Stainless Steel Type 316 Regular Wall
• Corrosion Resistant
• Tight Tolerances

Type 316 Stainless Steel Full Hard, TIG Welded and Drawn tubing is a hard-tempered, small-bore tubing used to make spacers, needles, guide wire assemblies, cannulas, capillary Tubing etc. and is widely applied in the medical, mechanical, electronic, chemical and aeronautical fields. Commonly called seamless because of its cosmetic appearance. Our Stainless Steel 316 Hypodermic Tubing is molybdenum bearing austenitic steel containing a higher percentage of nickel and a smaller percentage of chromium compared to 304. The higher corrosion resistance of 316 Stainless vs. 304 Stainless is particularly useful when working with phosphoric and acetic acids.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 21, 2011 10:19:10

Stainless Steel 316 Hypodermic Round Tubing, 27 Gauge, 0.0163" OD, 0.008" ID, 0.004" Wall, 60" Length (Pack of 10)

Stainless Steel 316 Hypodermic Round Tubing, 27 Gauge, 0.0163" OD, 0.008" ID, 0.004" Wall, 60" Length (Pack of 10) Reviews

Other Picture

Stainless Steel 316 Hypodermic Round Tubing, 27 Gauge, 0.0163" OD, 0.008" ID, 0.004" Wall, 60" Length (Pack of 10) Feature

• Welded and drawn construction
• Full Hard Temper
• Stainless Steel Type 316 provides excellent corrosion resistance
• Extremely small outside and inside diameters for precision applications
• Tight tolerances

Type 316 Stainless Steel Full Hard, TIG Welded and Drawn tubing is a hard-tempered, small-bore tubing used to make spacers, needles, guide wire assemblies, cannulas, capillary Tubing etc. and is widely applied in the medical, mechanical, electronic, chemical and aeronautical fields. Commonly called seamless because of its cosmetic appearance. Our Stainless Steel 316 Hypodermic Tubing is molybdenum bearing austenitic steel containing a higher percentage of nickel and a smaller percentage of chromium compared to 304. The higher corrosion resistance of 316 Stainless vs. 304 Stainless is particularly useful when working with phosphoric and acetic acids.

Visit Store Now !!

Detail Products

• Stainless Steel 304 Hypodermic Round Tubing, 11 Gauge, 0.1200" OD, 0.087" ID, 0.0165" Wall, 60" Length
• Stainless Steel 316 Hypodermic Tubing, 23 Gauge, 0.025" OD, 0.017" ID, 0.004" Wall, 60" Length
• Stainless Steel 316 Hypodermic Tubing, 21 Gauge, 0.032" OD, 0.026" ID, 0.003" Wall, 60" Length
• SuperElastic Nitinol (56% Nickel, 44% Titanium) Wire, Straightened, 0.011" Diameter, 72" Length (Pack of 1)
• Stainless Steel 316 Hypodermic Tubing, 20 Gauge, 0.0355" OD, 0.0235" ID, 0.006" Wall, 60" Length

Detail Reviews

Aug 13, 2011 05:21:05

Stainless Steel 304 Hypodermic Round Tubing, 7 Gauge, 0.1800" OD, 0.15" ID, 0.015" Wall, 6" Length (Pack of 5)

Stainless Steel 304 Hypodermic Round Tubing, 7 Gauge, 0.1800" OD, 0.15" ID, 0.015" Wall, 6" Length (Pack of 5) Reviews

Other Picture

Stainless Steel 304 Hypodermic Round Tubing, 7 Gauge, 0.1800" OD, 0.15" ID, 0.015" Wall, 6" Length (Pack of 5) Feature

• Welded and drawn construction
• Full Hard Temper
• Stainless Steel Type 304 provides very good corrosion resistance
• Tight Tolerances

Type 304 Stainless Steel Full Hard, TIG Welded and Drawn tubing is a hard-tempered, small-bore tubing used to make spacers, needles, guide wire assemblies, cannulas, capillary tubing and other products. It is widely applied in the medical, mechanical, electronic, chemical and aeronautical fields. Commonly called seamless because of its cosmetic appearance, Hypodermic Tubing 304 is actually welded and drawn. Full hard, but can be annealed in an inert atmosphere. The annealing point is 1950 degree F 1065 degree C. The dimensional tolerance is uniform over the piece length. Hypodermic Tubing gauges are based on the Birmingham Gage, also known as Stubs Iron Wire Gage. Bright finish.

Visit Store Now !!

Detail Products

• Stainless Steel 316 Hypodermic Round Tubing, 9 Gauge, 0.1480" OD, 0.128" ID, 0.01" Wall, 60" Length
• Stainless Steel 304 Wire, Straightened, Precision Ground, ASTM A313, 0.030" Diameter, 60" Length (Pack of 5)
• Translucent Amber Miniature Polyimide Tubing, 26 AWG, 0.0159" ID, 0.0179" OD, 0.0010" Wall, 30" Length
• Stainless Steel 316 Hypodermic Tubing, 23 Gauge, 0.025" OD, 0.017" ID, 0.004" Wall, 60" Length
• SuperElastic Nitinol (56% Nickel, 44% Titanium) Wire, Straightened, 0.008" Diameter, 72" Length (Pack of 5)

Detail Reviews

Aug 06, 2011 15:22:03

Stainless Steel 316 Hypodermic Tubing, 17 Gauge, 0.058" OD, 0.042" ID, 0.008" Wall, 36" Length

Stainless Steel 316 Hypodermic Tubing, 17 Gauge, 0.058" OD, 0.042" ID, 0.008" Wall, 36" Length Reviews

Other Picture

Stainless Steel 316 Hypodermic Tubing, 17 Gauge, 0.058" OD, 0.042" ID, 0.008" Wall, 36" Length Feature

• Drawn
• Full Hard Temper
• Stainless Steel Type 316 Regular Wall
• Corrosion Resistant
• Tight Tolerances

Type 316 Stainless Steel Full Hard, TIG Welded and Drawn tubing is a hard-tempered, small-bore tubing used to make spacers, needles, guide wire assemblies, cannulas, capillary Tubing etc. and is widely applied in the medical, mechanical, electronic, chemical and aeronautical fields. Commonly called seamless because of its cosmetic appearance. Our Stainless Steel 316 Hypodermic Tubing is molybdenum bearing austenitic steel containing a higher percentage of nickel and a smaller percentage of chromium compared to 304. The higher corrosion resistance of 316 Stainless vs. 304 Stainless is particularly useful when working with phosphoric and acetic acids.

Visit Store Now !!

Detail Products

• Stainless Steel 316 Hypodermic Round Tubing, 27 Gauge, 0.0163" OD, 0.008" ID, 0.004" Wall, 60" Length
• Stainless Steel 316 Hypodermic Tubing, 20 Gauge, 0.0355" OD, 0.0235" ID, 0.006" Wall, 60" Length
• Stainless Steel 304 Hypodermic Round Tubing, 11 Gauge, 0.1200" OD, 0.087" ID, 0.0165" Wall, 60" Length
• Steel Music Wire, Straightened, 0.015" Diameter, 18" Length (Pack of 10)
• SuperElastic Nitinol (56% Nickel, 44% Titanium) Wire, Straightened, 0.008" Diameter, 72" Length (Pack of 5)

Detail Reviews

Jul 25, 2011 07:00:04

Zeus PTFE (Teflon) Heat Shrink Tubing, 3 Gauge, 0.010" Wall, Shrink Rat 2:1 48" Length

Zeus PTFE (Teflon) Heat Shrink Tubing, 3 Gauge, 0.010" Wall, Shrink Rat 2:1 48" Length Reviews

Other Picture

Zeus PTFE (Teflon) Heat Shrink Tubing, 3 Gauge, 0.010" Wall, Shrink Rat 2:1 48" Length Feature

• Tensile Strength 2,500 to 4,000 psi
• Maximum continuous operating temp. 500 F
• Excellent Chemical Resistance
• Clear View
• Lubricious Finish

This PTFE Heat Shrink 2:1 Tubing has a shrink range of 650 F +/- 25 F (343 C +/-10 C). PTFE (Polytetrafluoroethylene) goes into the gel state (amorphous to crystalline) at approximately 625 F (330 C). PTFE begins to shrink at 650 F (343 C). The mandrel or part to be covered by the Heat shrink tubing must be able to withstand this temperature range. Color: Clear.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 17, 2011 11:13:05

Stainless Steel 304 Hypodermic Tubing, 17 Gauge, 0.058" OD, 0.0475" ID, 0.00525" Wall, 36" Length

Stainless Steel 304 Hypodermic Tubing, 17 Gauge, 0.058" OD, 0.0475" ID, 0.00525" Wall, 36" Length Reviews

Other Picture

Stainless Steel 304 Hypodermic Tubing, 17 Gauge, 0.058" OD, 0.0475" ID, 0.00525" Wall, 36" Length Feature

• Drawn
• Full Hard Temper
• Stainless Steel Type 304
• Corrosion Resistant
• Tight Tolerances

Type 304 Stainless Steel Full Hard, TIG Welded and Drawn tubing is a hard-tempered, small-bore tubing used to make spacers, needles, guide wire assemblies, cannulas, capillary Tubing etc. and is widely applied in the medical, mechanical, electronic, chemical and aeronautical fields. Commonly called seamless because of its cosmetic appearance, Hypodermic Tubing 304 is actually welded and drawn. Full hard, but can be annealed in an inert atmosphere. The annealing point is 1950 degree F 1065 degree C. The dimensional tolerance is uniform over the piece length. Hypodermic Tubing gauges are based on the Birmingham Gage, also known as Stubs Iron Wire Gage. Bright finish.

Visit Store Now !!

Detail Products

• Stainless Steel 316 Hypodermic Round Tubing, 16 Gauge, 0.0650" OD, 0.047" ID, 0.009" Wall, 60" Length
• Translucent Amber Miniature Polyimide Tubing, 21 AWG, 0.0285" ID, 0.0305" OD, 0.0010" Wall, 30" Length
• SuperElastic Nitinol (56% Nickel, 44% Titanium) Wire, Straightened, 0.005" Diameter, 36" Length (Pack of 5)
• Stainless Steel 304V Wire, Precision Ground, Straightened (Vacuum-Arc Remelt), 0.035" Diameter, 60" Length (Pack of 5)
• Brass C260 Seamless Round Tubing, 3/32" OD,0.066"ID, 0.014" Wall, 12" Length (Pack of 3)

Detail Reviews

Jun 20, 2011 19:04:06

Zeus FEP Heat Shrink Tubing, 7 Gauge, 0.011" Wall, Heat Shrink Rat 1.3:1 48" Length

Zeus FEP Heat Shrink Tubing, 7 Gauge, 0.011" Wall, Heat Shrink Rat 1.3:1 48" Length Reviews

Other Picture

Zeus FEP Heat Shrink Tubing, 7 Gauge, 0.011" Wall, Heat Shrink Rat 1.3:1 48" Length Feature

• Tensile Strength, psi at 73 Deg F 3,000 - 4,000
• Elongation at 73 Deg F .300 percent
• Specific Gravity 2.12 - 2.17
• Shrink ratio is 1.3 to 1
• Maximum continuous operating temp. 500 F

This heat shrinkable FEP (Fluorinated Ethylene-Propylene) Tubing will shrink rapidly over inserted objects upon exposure to moderate heat. Soldered joints, parts, components and fittings of plastic, metal or wood that could not previously be protected because of the high temperature required for shrinkage can now have a transparent surface of Teflon with a continuous service temperature of 400 F (204 C). Shrinkage will occur completely at exposure to 350 F (177 C) with partial shrinkage beginning as low as 200 F (93 C). Suggested for connecting metal, glass or plastic tubes of similar or dissimilar diameters in low pressure applications. FEPs chemical resistance and dielectric properties are equal to PTFE (Polytetrafluoroethylene).

Visit Store Now !!

Detail Products

• Zeus FEP Heat Shrink Tubing, 10 Gauge, 0.010" Wall, Heat Shrink Rat 1.3:1 48" Length
• Zeus FEP Heat Shrink Tubing, 9 Gauge, 0.010" Wall, Heat Shrink Rat 1.3:1 48" Length

Detail Reviews

Jun 07, 2011 23:15:03

Stainless Steel 304 Hypodermic Tubing, 26 Gauge, 0.018" OD, 0.01" ID, 0.004" Wall, 36" Length

Stainless Steel 304 Hypodermic Tubing, 26 Gauge, 0.018" OD, 0.01" ID, 0.004" Wall, 36" Length Reviews

Other Picture

Stainless Steel 304 Hypodermic Tubing, 26 Gauge, 0.018" OD, 0.01" ID, 0.004" Wall, 36" Length Feature

• Drawn
• Full Hard Temper
• Stainless Steel Type 304
• Corrosion Resistant
• Tight Tolerances

Type 304 Stainless Steel Full Hard, TIG Welded and Drawn tubing is a hard-tempered, small-bore tubing used to make spacers, needles, guide wire assemblies, cannulas, capillary Tubing etc. and is widely applied in the medical, mechanical, electronic, chemical and aeronautical fields. Commonly called seamless because of its cosmetic appearance, Hypodermic Tubing 304 is actually welded and drawn. Full hard, but can be annealed in an inert atmosphere. The annealing point is 1950 degree F 1065 degree C. The dimensional tolerance is uniform over the piece length. Hypodermic Tubing gauges are based on the Birmingham Gage, also known as Stubs Iron Wire Gage. Bright finish.

Visit Store Now !!

Detail Products

• Stainless Steel 316 Hypodermic Round Tubing, 13 Gauge, 0.0950" OD, 0.071" ID, 0.012" Wall, 60" Length
• SuperElastic Nitinol (56% Nickel, 44% Titanium) Wire, Straightened, 0.005" Diameter, 36" Length (Pack of 5)
• Translucent Amber Miniature Polyimide Tubing, 38 AWG, 0.0040" ID, 0.0055" OD, 0.00075" Wall, 12" Length (Pack of 2)
• Stainless Steel 304V Wire, Precision Ground, Straightened (Vacuum-Arc Remelt), 0.030" Diameter, 60" Length (Pack of 5)
• Brass C260 Seamless Round Tubing, 5/32" OD,0.128"ID, 0.014" Wall, 36" Length

Detail Reviews

May 25, 2011 08:14:04

Stainless Steel 304 Hypodermic Tubing, 27 Gauge, 0.01625" OD, 0.01025" ID, 0.003" Wall, 12" Length

Stainless Steel 304 Hypodermic Tubing, 27 Gauge, 0.01625" OD, 0.01025" ID, 0.003" Wall, 12" Length Reviews

Other Picture

Stainless Steel 304 Hypodermic Tubing, 27 Gauge, 0.01625" OD, 0.01025" ID, 0.003" Wall, 12" Length Feature

• Drawn
• Full Hard Temper
• Stainless Steel Type 304
• Corrosion Resistant
• Tight Tolerances

Type 304 Stainless Steel Full Hard, TIG Welded and Drawn tubing is a hard-tempered, small-bore tubing used to make spacers, needles, guide wire assemblies, cannulas, capillary Tubing etc. and is widely applied in the medical, mechanical, electronic, chemical and aeronautical fields. Commonly called seamless because of its cosmetic appearance, Hypodermic Tubing 304 is actually welded and drawn. Full hard, but can be annealed in an inert atmosphere. The annealing point is 1950 degree F 1065 degree C. The dimensional tolerance is uniform over the piece length. Hypodermic Tubing gauges are based on the Birmingham Gage, also known as Stubs Iron Wire Gage. Bright finish.

Visit Store Now !!

Detail Products

• Stainless Steel 316 Hypodermic Round Tubing, 13 Gauge, 0.0950" OD, 0.071" ID, 0.012" Wall, 60" Length
• SuperElastic Nitinol (56% Nickel, 44% Titanium) Wire, Straightened, 0.028" Diameter, 72" Length (Pack of 1)
• Translucent Amber Miniature Polyimide Tubing, 19 AWG, 0.0359" ID, 0.0379" OD, 0.0010" Wall, 30" Length
• Stainless Steel 304V Wire, Precision Ground, Straightened (Vacuum-Arc Remelt), 0.062" Diameter, 60" Length (Pack of 1)
• Stainless Steel 316 Hypodermic Tubing, 20 Gauge, 0.0355" OD, 0.0235" ID, 0.006" Wall, 60" Length

Detail Reviews

May 17, 2011 04:41:03

Stainless Steel 304 Hypodermic Tubing, 17 Gauge, 0.058" OD, 0.05" ID, 0.004" Wall, 12" Length

Stainless Steel 304 Hypodermic Tubing, 17 Gauge, 0.058" OD, 0.05" ID, 0.004" Wall, 12" Length Reviews

Other Picture

Stainless Steel 304 Hypodermic Tubing, 17 Gauge, 0.058" OD, 0.05" ID, 0.004" Wall, 12" Length Feature

• Drawn
• Full Hard Temper
• Stainless Steel Type 304
• Corrosion Resistant
• Tight Tolerances

Type 304 Stainless Steel Full Hard, TIG Welded and Drawn tubing is a hard-tempered, small-bore tubing used to make spacers, needles, guide wire assemblies, cannulas, capillary Tubing etc. and is widely applied in the medical, mechanical, electronic, chemical and aeronautical fields. Commonly called seamless because of its cosmetic appearance, Hypodermic Tubing 304 is actually welded and drawn. Full hard, but can be annealed in an inert atmosphere. The annealing point is 1950 degree F 1065 degree C. The dimensional tolerance is uniform over the piece length. Hypodermic Tubing gauges are based on the Birmingham Gage, also known as Stubs Iron Wire Gage. Bright finish.

Visit Store Now !!

Detail Products

• Stainless Steel 316 Hypodermic Round Tubing, 15 Gauge, 0.0720" OD, 0.054" ID, 0.009" Wall, 60" Length
• Stainless Steel 304V Wire, Precision Ground, Straightened (Vacuum-Arc Remelt), 0.092" Diameter, 60" Length (Pack of 1)
• Stainless Steel 316 Hypodermic Tubing, 20 Gauge, 0.0355" OD, 0.0235" ID, 0.006" Wall, 60" Length
• SuperElastic Nitinol (56% Nickel, 44% Titanium) Wire, Straightened, 0.028" Diameter, 72" Length (Pack of 1)
• Translucent Amber Miniature Polyimide Tubing, 17 AWG, 0.0453" ID, 0.0513" OD, 0.0030" Wall, 12" Length (Pack of 10)

Detail Reviews

Mar 10, 2011 22:02:09