Black Nylon 12 Semi-Rigid Tubing, 0.190" ID, 0.250" OD, 0.030" Wall, 25' Length

Black Nylon 12 Semi-Rigid Tubing, 0.190" ID, 0.250" OD, 0.030" Wall, 25' Length Reviews

Other Picture

Nylon 12 Tubing - Very low moisture absorption: 1.4 percent maximum (at 73 Degrees F) Will not become brittle or swell because of water.Excellent resistance to flexural fatigue, tube vibration, and movement. Lightweight with excellent bend radii and pressure ratings. Resists crushing, abrasion,and cracking. Maximum operating temperature is 212 degrees F. Brittle temperature:-90 degrees F

Visit Store Now !!

Detail Products

• Stainless Steel Machine Screw, Flat Head, Phillips Drive, 1/4"-20, 1-3/8" Length (Pack of 100)
• Weed Eater 952701594 0.065-Inch-by-200-Foot Bulk Round String Trimmer Line
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #10-24, 2" Length (Pack of 100)
• Natural Nylon 12 Semi-Rigid Tubing, 0.075" ID, 0.125" OD, 0.025" Wall, 25' Length
• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #10-32, 1-3/4" Length (Pack of 100)

Detail Reviews

Aug 01, 2011 00:07:04

I/P<REG>26 Platinum-Cured Silicone Tubing; Bulk Pack, Ten 25-ft bags per box

I/P26 Platinum-Cured Silicone Tubing; Bulk Pack, Ten 25-ft bags per box Reviews

Other Picture

I/P26 Platinum-Cured Silicone Tubing; Bulk Pack, Ten 25-ft bags per box Feature

• I/P Bulk-Packed Silicone Tubing
• Convenient and cost-effective
• Excellent biocompatibility
• Broad chemical resistance
• Meets FDA and USP criteria
• Pump Series: I/P
• Tubing formulation: Silicone
• Min temperature (° F): -58
• Min temperature (° C): -50
• Type: Masterflex I/P Tubing
• Max temperature (° F): 446
• Max temperature (° C): 230
• Masterflex tubing size (I/P): 26
• Tubing ID (mm): 6.4
• Tubing ID (inches): 0.25
• Hose barb size (inches): 0.25
• Resin certification (FDA): Yes
• Resin certification (3A): Yes
• Resin certification (USP): Yes
• Max vacuum (" Hg): 26
• Max vacuum (mm Hg): 660
• Max pressure (psi): 25
• Max pressure (bar): 1.725
• Max pressure continuous (psi): 40
• Max pressure continuous (bar): 2.7
• Suction lift (ft H2O): 29
• Suction lift (m H2O): 8.8
• Color: Transparent
• Brand: Masterflex
• Part Number: AO-96404-26

Our bulk tubing comes in convenient cases containing up to 20 sealed bags of tubing (depending on tubing size). Bulk tubing eliminates individual cardbaord boxes, reducing unpacking time and saving you money on shipping. Each bag of tubing includes 25-ft of tubing.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 31, 2011 03:42:08

Clear Tygon R3603 Laboratory Tubing, 3/32" ID, 5/32" OD, 1/32" Wall, 25' Length

Clear Tygon R3603 Laboratory Tubing, 3/32" ID, 5/32" OD, 1/32" Wall, 25' Length Reviews

Other Picture

Tygon Formulation R-3603 Laboratory Tubing is Crystal-clear and flexible and can handle virtually all inorganic chemicals found in the lab. It is non-oxidizing and non-contaminating. It is Long-lasting, crack-resistant, and is less permeable than rubber tubing. The glassy-smooth inner bore helps prevent buildup for so that cleaning is facilitated. This tubing is autoclavable. Coils are marked at 1-foot intervals for easy measuring. Remains flexible at -45 F (43 C). Durometer hardness: Shore A, 55.

Visit Store Now !!

Detail Products

• Clear Tygon S-50-HL Medical Tubing, 1/8" ID, 1/4" OD, 1/16" Wall, 10' Length
• Clear Tygon B-44-3 Beverage Tubing, 1/4" ID, 3/8" OD, 1/16" Wall, 10' Length
• Clear PVC Tubing, 3/8" ID, 3/4" OD, 3/16" Wall, 25' Length
• Polyurethane Clear Tubing, 1/16" ID x 1/8" OD x 1/32" W, Working Pressure: 134 PSI 100' Length
• Clear Tygon Micro Bore PVC Tubing, 0.010" ID, 0.030" OD, 0.010" Wall, 25' Length

Detail Reviews

Jul 30, 2011 01:28:11

White Translucent Nylon 101 Round Tubing, 3/8" OD, 5/16" ID, 60" Length

White Translucent Nylon 101 Round Tubing, 3/8" OD, 5/16" ID, 60" Length Reviews

Other Picture

White Translucent Nylon 101 Round Tubing, 3/8" OD, 5/16" ID, 60" Length Feature

• Nominal Tolerances: O.D. on plus side up to .040"
• Nominal Tolerances: I.D. on minus side up to .040"

Nylon's combination of mechanical properties, excellent wear, abrasion resistance and weight, make it an excellent replacement for metals and bronze parts. Nylon is 1/8 the weight of bronze, yet it is easier to handle and maintain than metals. Nylon has a proven record of outstanding service in a wide range of parts for all industries. It is easy to fabricate using standard metal working equipment.

Visit Store Now !!

Detail Products

• Nylon 6/6 Shoulder Washer, 0.265" ID, 0.307" OD, 0.062" Thick, 0.500" Shoulder Diameter, 0.249" Length (Pack of 100)
• Brass Machine Screw, Round Head, Slotted Drive, #8-32, 3/16" Length (Pack of 100)
• Natural Nylon 12 Flexible Tubing, 0.250" ID, 0.375" OD, 0.063" Wall, 25' Length
• Black Polyethylene (LLDPE) Tubing, 0.125" ID, 0.250" OD, 0.063" Wall, 25' Length
• Grade 8 Yellow Chromate Alloy Steel Hex Bolt, 3/8"-16, 4-1/4" Length (Pack of 10)

Detail Reviews

Jul 26, 2011 21:49:04

Stainless Steel 316 Hypodermic Tubing, 17 Gauge, 0.058" OD, 0.042" ID, 0.008" Wall, 36" Length

Stainless Steel 316 Hypodermic Tubing, 17 Gauge, 0.058" OD, 0.042" ID, 0.008" Wall, 36" Length Reviews

Other Picture

Stainless Steel 316 Hypodermic Tubing, 17 Gauge, 0.058" OD, 0.042" ID, 0.008" Wall, 36" Length Feature

• Drawn
• Full Hard Temper
• Stainless Steel Type 316 Regular Wall
• Corrosion Resistant
• Tight Tolerances

Type 316 Stainless Steel Full Hard, TIG Welded and Drawn tubing is a hard-tempered, small-bore tubing used to make spacers, needles, guide wire assemblies, cannulas, capillary Tubing etc. and is widely applied in the medical, mechanical, electronic, chemical and aeronautical fields. Commonly called seamless because of its cosmetic appearance. Our Stainless Steel 316 Hypodermic Tubing is molybdenum bearing austenitic steel containing a higher percentage of nickel and a smaller percentage of chromium compared to 304. The higher corrosion resistance of 316 Stainless vs. 304 Stainless is particularly useful when working with phosphoric and acetic acids.

Visit Store Now !!

Detail Products

• Stainless Steel 316 Hypodermic Round Tubing, 27 Gauge, 0.0163" OD, 0.008" ID, 0.004" Wall, 60" Length
• Stainless Steel 316 Hypodermic Tubing, 20 Gauge, 0.0355" OD, 0.0235" ID, 0.006" Wall, 60" Length
• Stainless Steel 304 Hypodermic Round Tubing, 11 Gauge, 0.1200" OD, 0.087" ID, 0.0165" Wall, 60" Length
• Steel Music Wire, Straightened, 0.015" Diameter, 18" Length (Pack of 10)
• SuperElastic Nitinol (56% Nickel, 44% Titanium) Wire, Straightened, 0.008" Diameter, 72" Length (Pack of 5)

Detail Reviews

Jul 25, 2011 07:00:04

Aluminum 3003 Seamless Round Tubing, 5/32" OD, 0.1283" ID, 0.014" Wall, 36" Length (Pack of 3)

Aluminum 3003 Seamless Round Tubing, 5/32" OD, 0.1283" ID, 0.014" Wall, 36" Length (Pack of 3) Reviews

Other Picture

Aluminum 3003 Seamless Round Tubing, 5/32" OD, 0.1283" ID, 0.014" Wall, 36" Length (Pack of 3) Feature

• ASTM B210
• Good corrosion resistance and lightweight
• Telescoping
• Alloy 3003-H14
• Seamless construction

Aluminum telescoping tubing. Seamless Type 3003-H14 ASTM B210

Visit Store Now !!

Detail Products

• Brass C260 Seamless Round Tubing, 3/8" OD,0.317"ID, 0.029" Wall, 12" Length
• Copper C122 Seamless Round Tubing, 1/16" OD, 0.0345" ID, 0.014" Wall, 12" Length (Pack of 6)
• Aluminum 3003 Seamless Round Tubing, 1/4"OD, 0.222"ID, .014"Wall, 36"Length
• Stainless Steel 304 Hypodermic Round Tubing, 11 Gauge, 0.1200" OD, 0.087" ID, 0.0165" Wall, 60" Length
• Brass C260 Square Tubing, 1/4" x 1/4", 0.014" Wall, 36" Length

Detail Reviews

Jul 22, 2011 11:46:31

Zeus PTFE (Teflon) Tube Thin Wall 3/16 Gauge 10' Length Coil or Spool

Zeus PTFE (Teflon) Tube Thin Wall 3/16 Gauge 10' Length Coil or Spool Reviews

Other Picture

Zeus PTFE (Teflon) Tube Thin Wall 3/16 Gauge 10' Length Coil or Spool Feature

• Biocompatible USP Class VI
• Flame Resistant UL 94 VO
• -454 to 500 Degrees
• Limiting Oxygen Index Greater Than 95
• ETO and Autoclave Sterilizable

PTFE (Polytetrafluoroethylene), Sometimes referred to as Teflon is lightweight, semi flexible, and is used for a variety of laboratory applications. Heat resistant to 500 Degrees F (260 Degrees C) continuous. Highly valued for its toughness and insulating qualities, as well as high dielectric strength over a wide range of frequencies.ETO and Autoclave sterilization. Non absorbent to water and unaffected by acids and alkali's. Should not be heated to temperatures above 752 Degrees F (400 Degrees C). Color: White Translucent Natural.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 21, 2011 16:30:31

Zeus PTFE (Teflon) Tube Thin Wall 19 Gauge 10' Length Coil or Spool

Zeus PTFE (Teflon) Tube Thin Wall 19 Gauge 10' Length Coil or Spool Reviews

Other Picture

Zeus PTFE (Teflon) Tube Thin Wall 19 Gauge 10' Length Coil or Spool Feature

• Biocompatible USP Class VI
• Flame Resistant UL 94 VO
• -454 to 500 Degrees
• Limiting Oxygen Index Greater Than 95
• ETO and Autoclave Sterilizable

PTFE (Polytetrafluoroethylene), Sometimes referred to as Teflon is lightweight, semi flexible, and is used for a variety of laboratory applications. Heat resistant to 500 Degrees F (260 Degrees C) continuous. Highly valued for its toughness and insulating qualities, as well as high dielectric strength over a wide range of frequencies.ETO and Autoclave sterilization. Non absorbent to water and unaffected by acids and alkali's. Should not be heated to temperatures above 752 Degrees F (400 Degrees C). Color: White Translucent Natural.

Visit Store Now !!

Detail Products

• Zeus PTFE (Teflon) Tube Thin Wall 18 Gauge 10' Length Coil or Spool
• Zeus PTFE (Teflon) Tube Thin Wall 17 Gauge 100' Length Coil or Spool

Detail Reviews

Jul 20, 2011 15:30:03

Natural Nylon 12 Flexible Tubing, 0.500" ID, 0.625 " OD, 0.063" Wall, 10' Length

Natural Nylon 12 Flexible Tubing, 0.500" ID, 0.625 " OD, 0.063" Wall, 10' Length Reviews

Other Picture

Nylon 12 Flexible Tubing offers very low moisture absorption and will not become brittle or swell because of water. Excellent resistance to flexural fatigue, tube vibration and movement. Nylon 12 tubing is lightweight and posses outstanding bend radii and pressure ratings. It is also resistant to crushing, abrasion and cracking.

Visit Store Now !!

Detail Products

• Stainless Steel 304 Hypodermic Round Tubing, 11 Gauge, 0.1200" OD, 0.087" ID, 0.0165" Wall, 60" Length
• White Translucent Nylon 101 Round Tubing, 3/8" OD, 5/16" ID, 48" Length
• Stainless Steel 316 Hypodermic Round Tubing, 27 Gauge, 0.0163" OD, 0.008" ID, 0.004" Wall, 60" Length
• Brass Machine Screw, Round Head, Slotted Drive, #8-32, 3/16" Length (Pack of 100)
• Grade 9 Yellow Chromate Alloy Steel Hex Bolt, 7/16"-14, 5" Length (Pack of 5)

Detail Reviews

Jul 19, 2011 00:22:05

Zeus PTFE (Teflon) Heat Shrink Tubing, 3 Gauge, 0.010" Wall, Shrink Rat 2:1 48" Length

Zeus PTFE (Teflon) Heat Shrink Tubing, 3 Gauge, 0.010" Wall, Shrink Rat 2:1 48" Length Reviews

Other Picture

Zeus PTFE (Teflon) Heat Shrink Tubing, 3 Gauge, 0.010" Wall, Shrink Rat 2:1 48" Length Feature

• Tensile Strength 2,500 to 4,000 psi
• Maximum continuous operating temp. 500 F
• Excellent Chemical Resistance
• Clear View
• Lubricious Finish

This PTFE Heat Shrink 2:1 Tubing has a shrink range of 650 F +/- 25 F (343 C +/-10 C). PTFE (Polytetrafluoroethylene) goes into the gel state (amorphous to crystalline) at approximately 625 F (330 C). PTFE begins to shrink at 650 F (343 C). The mandrel or part to be covered by the Heat shrink tubing must be able to withstand this temperature range. Color: Clear.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 17, 2011 11:13:05

PVC NSF-61 Square Tubing, Gray, 4.72" X 4.72", 0.098" Wall, 48" Length

PVC NSF-61 Square Tubing, Gray, 4.72" X 4.72", 0.098" Wall, 48" Length Reviews

Other Picture

PVC NSF-61 Square Tubing, Gray, 4.72" X 4.72", 0.098" Wall, 48" Length Feature

• Corrosion Resistant
• Limited Solvent Bondability
• Excellent Wet Applications
• Agricultural and Marine
• NSF 1,14 & 61, UL94 VO

These PVC square profiles are corrosion resistant and heat resistant to 158F. These profiles are used for light structural duty in wet industrial environments, agricultural settings, and in the marine industry. Excellent corrosion resistance makes them an ideal material to use in plants handling various chemicals where metal can be replaced without sacrificing structural integrity. Solvent resistance is limited and not recommended for direct contact.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 16, 2011 07:05:06

Stainless Steel 304L Welded Round Tubing, 1/2" OD, 0.444" ID, 0.028" Wall, 36" Length

Stainless Steel 304L Welded Round Tubing, 1/2" OD, 0.444" ID, 0.028" Wall, 36" Length Reviews

Other Picture

Stainless Steel 304L Welded Round Tubing, 1/2" OD, 0.444" ID, 0.028" Wall, 36" Length Feature

• Low carbon content for weldability
• ASTM A269
• Welded and drawn construction
• Bendable and flareable
• Dual certified stainless steel 304/304L

Stainless Steel 304/304L Dual Certified Annealed Welded Tubing ASTM A269 Bright Finish tubing meets the requirements of both grades 316 and 316L. The L means low carbon and is easier to work with when welding. Tubing is annealed, allowing it to be bent without cracking. Good corrosion resistance. Tubing may be flared and is compatible with conventional compression or flare fittings. Best value for general purpose use.

Visit Store Now !!

Detail Products

• Stainless Steel 316L Welded Round Tubing, 5/8" OD, 0.527" ID, 0.049" Wall, 36" Length
• Stainless Steel 304L Seamless Round Tubing, 1/2" OD, 0.402" ID, 0.049" Wall, 36" Length
• Stainless Steel 304 Hypodermic Round Tubing, 11 Gauge, 0.1200" OD, 0.087" ID, 0.0165" Wall, 60" Length
• Brass C260 Seamless Round Tubing, 17/32" OD,0.503"ID, 0.014" Wall, 12" Length (Pack of 3)
• White SiliconeTubing, 3/16"ID, 5/16"OD, 1/16" Wall, 10' Length

Detail Reviews

Jul 14, 2011 18:18:04

Stainless Steel 304L Seamless Round Tubing, 1/4" OD, 0.18" ID, 0.035" Wall, 72" Length

Stainless Steel 304L Seamless Round Tubing, 1/4" OD, 0.18" ID, 0.035" Wall, 72" Length Reviews

Other Picture

Stainless Steel 304L Seamless Round Tubing, 1/4" OD, 0.18" ID, 0.035" Wall, 72" Length Feature

• Low carbon content for weldability
• ASTM A269
• Welded and drawn construction
• Bendable and flareable
• Dual certified stainless steel 304/304L

Stainless Steel 304/304L Dual Certified Annealed Welded Tubing ASTM A269 Bright Finish tubing meets the requirements of both grades 316 and 316L. The L means low carbon and is easier to work with when welding. Tubing is annealed, allowing it to be bent without cracking. Good corrosion resistance. Tubing may be flared and is compatible with conventional compression or flare fittings. Best value for general purpose use.

Visit Store Now !!

Detail Products

• Stainless Steel 316L Seamless Round Tubing, 5/16" OD, 0.243" ID, 0.035" Wall, 36" Length
• Stainless Steel 304L Welded Round Tubing, 1/2" OD, 0.402" ID, 0.049" Wall, 36" Length
• Stainless Steel 316L Welded Round Tubing, 5/8" OD, 0.527" ID, 0.049" Wall, 36" Length
• Stainless Steel 304 Hypodermic Round Tubing, 11 Gauge, 0.1200" OD, 0.087" ID, 0.0165" Wall, 60" Length
• Stainless Steel 321 Seamless Round Tubing, 1" OD, 0.96" ID, 0.020" Wall, 24" Length

Detail Reviews

Jul 13, 2011 23:09:05