Translucent Amber Miniature Polyimide Tubing, 32 AWG, 0.0079" ID, 0.0094" OD, 0.00075" Wall, 30" Length

Translucent Amber Miniature Polyimide Tubing, 32 AWG, 0.0079" ID, 0.0094" OD, 0.00075" Wall, 30" Length Reviews

Other Picture

When thin walls, tight tolerances and high strength are required, polyimide is the material of choice. Polyimide is in the select group of super polymers and is now available in micro and miniature tubing sizes. Our tubing has a thermal rating of -452F (-269C) To 700F (371C) for continuous use application with a dielectric constant of 3.4. This material is considered a benchmark for polymers in electrical insulation applications. This tubing exhibits exceptional dimensional stability and has very high burst pressure ratings. Excellent column strength and high stiffness has proven to provide good push and torque properties making polyimide tubing an excellent choice for catheters that are guided through the body's vascular system. Other uses include high strength, temperature and chemical resistant push rod tubes, and miniature structural matrices. This tubing can be steam, gamma or EtO sterilized and has excellent chemical resistance. Polyimide tubing can be bonded with cyanoacrylates, UV and room temperature cure epoxies.

Visit Store Now !!

Detail Products

• Stainless Steel 304 Hypodermic Round Tubing, 11 Gauge, 0.1200" OD, 0.087" ID, 0.0165" Wall, 60" Length
• Translucent Amber PEEK Tubing, 14 AWG, 0.073" ID, 0.076" OD, 0.0015" Wall, 36" Length
• Stainless Steel 316 Hypodermic Round Tubing, 9 Gauge, 0.1480" OD, 0.128" ID, 0.01" Wall, 60" Length
• SuperElastic Nitinol (56% Nickel, 44% Titanium) Wire, Straightened, 0.017" Diameter, 72" Length (Pack of 1)
• Tan PEEK Tubing, 0.062" ID, 0.125" OD, 0.032" Wall, 3' Length

Detail Reviews

Sep 09, 2011 06:12:10

Aluminum 6061-T6511 Rectangular Tubing, 2"x4", 0.25" Wall, 72" Length

Aluminum 6061-T6511 Rectangular Tubing, 2"x4", 0.25" Wall, 72" Length Reviews

Other Picture

Aluminum 6061-T6511 Rectangular Tubing, 2"x4", 0.25" Wall, 72" Length Feature

• Excellent corrosion resistance
• Versatile for medium to high strength requirements
• Use for transportation components, recreation products, machinery and equipment
• Good finishing characteristics
• Min 38 ksi tensile strength

Aluminum 6061 is one of the most widely used alloys in the 6000 series. This standard structural alloy, one of the most versatile of the heat-treatable alloys, is popular for medium to high strength requirements and has good toughness characteristics. Alloy 6061 has excellent corrosion resistance to atmospheric conditions and good corrosion resistance to seawater. This alloy also offers good finishing characteristics and responds well to anodizing; however, where cosmetic appearance is critical, consider the use of alloy 6063. For screw machine applications, alloy 6061 has adequate machinability characteristics in the heat-treated -T6/-T6511 condition. Chips from machining (particularly turning and drilling) can be difficult to break in the -T6/-T6511 temper condition. Chip breakers are recommended, and special machining techniques (i.e. peck drilling) can improve chip formation.

Visit Store Now !!

Detail Products

• Aluminum 6061-T6511 Round Tubing, 3.25" OD, 2.75" ID, 0.25" Wall, 36" Length
• Aluminum 6061-T6511 Rectangular Bar, 0.375" Thick, 1.5" Width, 36" Length
• Aluminum 6061-T6 U-Channel, 0.13" Thick, 2" Width, 1" Leg Length, 72" Length

Detail Reviews

Sep 08, 2011 00:37:06

Clear PVC Tubing, 5/16" ID, 9/16" OD, 1/8" Wall, 10' Length

Clear PVC Tubing, 5/16" ID, 9/16" OD, 1/8" Wall, 10' Length Reviews

Other Picture

A general purpose, clear, and flexible PVC plastic tubing for transmission of fluids, gases, and some solids. Especially useful when light weight is necessary and rough handling could be encountered. Superior resistance to strong oxidizing and reducing acids, gasoline, oils in general, alcohol, and hydrocarbons. Durometer hardness of 68A.

Visit Store Now !!

Detail Products

• White SiliconeTubing, 1/2"ID, 5/8"OD, 1/16" Wall, 10' Length
• Polycarbonate Tubing, 1/4" ID x 3/8" OD x 1/16" Wall, Clear Color 36" L
• Sunterra 301220 1/2-Inch PVC Tubing for Water Gardening - 20-Foot Roll, Black
• Clear Tygon R3603 Laboratory Tubing, 1/16" ID, 1/8" OD, 1/32" Wall, 50' Length
• Sunterra 104506 Table Top Fountain Pump 30 GPH, Black

Detail Reviews

Sep 05, 2011 19:46:04

Clear NSF-61 Polyurethane Tubing, 0.125" ID, 0.250" OD, 0.063" Wall, 10' Length

Clear NSF-61 Polyurethane Tubing, 0.125" ID, 0.250" OD, 0.063" Wall, 10' Length Reviews

Other Picture

Superthane ether-based polyurethane tubing is clear, flexible, resistant to oils, greases and fuels, resistant to weathering, tearing, impact, radiation and abrasion, and can withstand a temperature range of -90 Deg F to 175 Deg F. It contains no plasticizer that can cause flow contamination or tube hardening and is manufactured from FDA-sanctioned ingredients for use with wet and fatty food contact surfaces. Ether-based material is listed by the National Sanitation Foundation (NSF 61). This tubing can be heat sealed, coiled, fabricated or bonded. Common Applications: Granular Transfer Lines, Grease Lines, Insulating Sleeves, Metering Pumps, Nuclear Power Facilities, Oxygen and Other Gas Lines, Pressure Measuring Devices, Robotics, Slurry Transfer, Small Motor Fuel Lines, Transfer Lines for Clean Liquids, Transfer Lines for Internal Contamination Fluids, Vacuum Equipment

Visit Store Now !!

Detail Products

• Clear Polyurethane Tubing, 0.170" ID, 0.250" OD, 0.040" Wall, 10' Length
• Clear Tygon B-44-3 Beverage Tubing, 3/16" ID, 1/4" OD, 1/32" Wall, 10' Length
• White Translucent FEP Tubing, 0.375" ID, 0.438" OD, 0.030" Wall, 10' Length
• Clear PVC Tubing, 1/4" ID, 7/16" OD, 3/32" Wall, 25' Length
• Arduino UNO board

Detail Reviews

Sep 05, 2011 00:16:03

Tan Tygon Pharmed BPT Tubing, 3/16" ID, 5/16" OD, 1/16" Wall, 10' Length

Tan Tygon Pharmed BPT Tubing, 3/16" ID, 5/16" OD, 1/16" Wall, 10' Length Reviews

Other Picture

PharMed BPT Tubing is for use in peristaltic pumps and is less permeable to gases and vapors than silicone tubing. It is ideal for cell culture, fermentation, synthesis, separation, purification and process monitoring and control. PharMed BPT tubing is ideal for use in clean-in-place and steam-in-place cleaning and sterilization systems. It is compatible with virtually all commercial cleaners and sanitizers and can be repeatedly autoclaved for up to five cycle times, without affecting overall service life.

Visit Store Now !!

Detail Products

• Clear Tygon Micro Bore PVC Tubing, 0.020" ID, 0.060" OD, 0.020" Wall, 25' Length

Detail Reviews

Sep 04, 2011 02:55:06

Stainless Steel 304L Welded Round Tubing, 5/16" OD, 0.257" ID, 0.028" Wall, 72" Length

Stainless Steel 304L Welded Round Tubing, 5/16" OD, 0.257" ID, 0.028" Wall, 72" Length Reviews

Other Picture

Stainless Steel 304L Welded Round Tubing, 5/16" OD, 0.257" ID, 0.028" Wall, 72" Length Feature

• Low carbon content for weldability
• ASTM A269
• Welded and drawn construction
• Bendable and flareable
• Dual certified stainless steel 304/304L

Stainless Steel 304/304L Dual Certified Annealed Welded Tubing ASTM A269 Bright Finish tubing meets the requirements of both grades 316 and 316L. The L means low carbon and is easier to work with when welding. Tubing is annealed, allowing it to be bent without cracking. Good corrosion resistance. Tubing may be flared and is compatible with conventional compression or flare fittings. Best value for general purpose use.

Visit Store Now !!

Detail Products

• Stainless Steel 304 Hypodermic Round Tubing, 11 Gauge, 0.1200" OD, 0.087" ID, 0.0165" Wall, 60" Length
• Stainless Steel 316L Seamless Round Tubing, 5/16" OD, 0.243" ID, 0.035" Wall, 12" Length
• Stainless Steel 316L Welded Round Tubing, 3/8" OD, 0.319" ID, 0.028" Wall, 72" Length
• Stainless Steel 304L Seamless Round Tubing, 1/2" OD, 0.46" ID, 0.02" Wall, 36" Length
• Stainless Steel 316 Hypodermic Round Tubing, 9 Gauge, 0.1480" OD, 0.128" ID, 0.01" Wall, 60" Length

Detail Reviews

Sep 02, 2011 17:58:03

Hot Rolled Steel - DOM Tubes - Alloy - A36 - 1 1/2" x 1/4" x 6'

Hot Rolled Steel - DOM Tubes - Alloy - A36 - 1 1/2" x 1/4" x 6' Reviews

Other Picture

1 1/2" (B) x 1/4" (L) - Hot Rolled Steel - A36 - DOM Tubes DOM is a cold drawn electric resistance welded tube with all flash removed. Each tube is tested for soundness of weld. Preferred over seamless tubing for its excellent OD&ID concentricity. Normalizing and cold drawing over a mandrel makes DOM a uniform and precision product.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 01, 2011 15:37:03