Gray Nylatron GS Nylon Round Tubing, 5/8" OD, 3/8" ID, 48" Length

Gray Nylatron GS Nylon Round Tubing, 5/8" OD, 3/8" ID, 48" Length Reviews

Other Picture

Gray Nylatron GS Nylon Round Tubing, 5/8" OD, 3/8" ID, 48" Length Feature

• Nominal Tolerances: O.D. on plus side up to .040"
• Nominal Tolerances: I.D. on minus side up to .040"

Nylatron(R) GS is molybdenum disulphide (MoS2) filled nylon offering improved strength and rigidity. With a lower coefficient of linear thermal expansion than Nylon 101, Nylatron GS parts maintain better fit and clearances, and have less tendency to seize as bearings.

Visit Store Now !!

Detail Products

Detail Reviews

May 31, 2011 00:34:04

Clear PVC Tubing, 7/16" ID, 11/16" OD, 1/8" Wall, 25' Length

Clear PVC Tubing, 7/16" ID, 11/16" OD, 1/8" Wall, 25' Length Reviews

Other Picture

A general purpose, clear, and flexible PVC plastic tubing for transmission of fluids, gases, and some solids. Especially useful when light weight is necessary and rough handling could be encountered. Superior resistance to strong oxidizing and reducing acids, gasoline, oils in general, alcohol, and hydrocarbons. Durometer hardness of 68A.

Visit Store Now !!

Detail Products

• White SiliconeTubing, 1/8"ID, 3/16"OD, 1/32" Wall, 10' Length
• White Translucent Polyethylene Tubing, 1/8" ID, 1/4" OD, 1/16" Wall, 100' Length
• Clear Tygon R3603 Laboratory Tubing, 1/16" ID, 1/8" OD, 1/32" Wall, 50' Length
• Vinyl Tubing - 10 feet 5/16 ID - 7/16 OD (Food Grade)
• Polyurethane Clear Tubing, 3/16" ID x 5/16" OD x 1/16" W, Working Pressure: 74 PSI 25' Length

Detail Reviews

May 29, 2011 21:08:29

Stainless Steel 316L Seamless Round Tubing, 3/4" OD, 0.584" ID, 0.083" Wall, 72" Length

Stainless Steel 316L Seamless Round Tubing, 3/4" OD, 0.584" ID, 0.083" Wall, 72" Length Reviews

Other Picture

Stainless Steel 316L Seamless Round Tubing, 3/4" OD, 0.584" ID, 0.083" Wall, 72" Length Feature

• Low Carbon Content For Weldability
• ASTM A269
• Seamless construction for smoother interior flow
• Bendable and flareable
• Excellent corrosion resistance

Stainless Steel 316/316L Dual Certified Annealed Seamless Tubing ASTM A269 Bright Finish tubing meets the requirements of both grades 316 and 316L. The L means low carbon and is easier to work with when welding. Tubing is annealed, allowing it to be bent without cracking. Type 316/316L contains molybdenum for greater resistance to corrosion and pitting. Excellent corrosion resistance and a smooth bore make it suitable for water, gasses, oil, chemicals and processes where particulate build needs to be kept to a minimum. Tubing may be flared and is compatible with conventional compression or flare fittings.

Visit Store Now !!

Detail Products

• Stainless Steel 304L Seamless Round Tubing, 3/8" OD, 0.355" ID, 0.01" Wall, 72" Length
• Stainless Steel 304 Welded Round Tubing, 1/4" OD, 0.21" ID, 0.020" Wall, 36" Length
• Stainless Steel 316L Welded Round Tubing, 1/2" OD, 0.402" ID, 0.049" Wall, 72" Length
• Stainless Steel 321 Seamless Round Tubing, 3/8" OD, 0.277" ID, 0.049" Wall, 72" Length
• Stainless Steel 304 Hypodermic Round Tubing, 25 Gauge, 0.0203" OD, 0.01" ID, 0.005" Wall, 60" Length (Pack of 5)

Detail Reviews

May 28, 2011 11:03:05

Clear NSF-61 Polyurethane Tubing, 0.375" ID, 0.625" OD, 0.125" Wall, 100' Length

Clear NSF-61 Polyurethane Tubing, 0.375" ID, 0.625" OD, 0.125" Wall, 100' Length Reviews

Other Picture

Superthane ether-based polyurethane tubing is clear, flexible, resistant to oils, greases and fuels, resistant to weathering, tearing, impact, radiation and abrasion, and can withstand a temperature range of -90 Deg F to 175 Deg F. It contains no plasticizer that can cause flow contamination or tube hardening and is manufactured from FDA-sanctioned ingredients for use with wet and fatty food contact surfaces. Ether-based material is listed by the National Sanitation Foundation (NSF 61). This tubing can be heat sealed, coiled, fabricated or bonded. Common Applications: Granular Transfer Lines, Grease Lines, Insulating Sleeves, Metering Pumps, Nuclear Power Facilities, Oxygen and Other Gas Lines, Pressure Measuring Devices, Robotics, Slurry Transfer, Small Motor Fuel Lines, Transfer Lines for Clean Liquids, Transfer Lines for Internal Contamination Fluids, Vacuum Equipment

Visit Store Now !!

Detail Products

• Clear Polyurethane Tubing, 0.170" ID, 0.250" OD, 0.040" Wall, 10' Length
• Clear Tygon S-50-HL Medical Tubing, 1/32" ID, 3/32" OD, 1/32" Wall, 10' Length
• Clear Tygon Micro Bore PVC Tubing, 0.020" ID, 0.060" OD, 0.020" Wall, 25' Length
• Arduino UNO board
• SE Clip Test Lead Set (10 Piece)

Detail Reviews

May 27, 2011 13:39:05

Translucent Amber Miniature Polyimide Tubing, 18 AWG, 0.0403" ID, 0.0423" OD, 0.0010" Wall, 30" Length (Pack of 10)

Translucent Amber Miniature Polyimide Tubing, 18 AWG, 0.0403" ID, 0.0423" OD, 0.0010" Wall, 30" Length (Pack of 10) Reviews

Other Picture

When thin walls, tight tolerances and high strength are required, polyimide is the material of choice. Polyimide is in the select group of super polymers and is now available in micro and miniature tubing sizes. Our tubing has a thermal rating of -452F (-269C) To 700F (371C) for continuous use application with a dielectric constant of 3.4. This material is considered a benchmark for polymers in electrical insulation applications. This tubing exhibits exceptional dimensional stability and has very high burst pressure ratings. Excellent column strength and high stiffness has proven to provide good push and torque properties making polyimide tubing an excellent choice for catheters that are guided through the body's vascular system. Other uses include high strength, temperature and chemical resistant push rod tubes, and miniature structural matrices. This tubing can be steam, gamma or EtO sterilized and has excellent chemical resistance. Polyimide tubing can be bonded with cyanoacrylates, UV and room temperature cure epoxies.

Visit Store Now !!

Detail Products

• Stainless Steel 304 Hypodermic Round Tubing, 25 Gauge, 0.0203" OD, 0.01" ID, 0.005" Wall, 60" Length (Pack of 5)
• Translucent Amber PEEK Tubing, 20 AWG, 0.032" ID, 0.036" OD, 0.002" Wall, 24" Length
• SuperElastic Nitinol (56% Nickel, 44% Titanium) Wire, Straightened, 0.005" Diameter, 36" Length (Pack of 5)
• Stainless Steel 316 Hypodermic Tubing, 18 Gauge, 0.05" OD, 0.033" ID, 0.0085" Wall, 12" Length
• Tan PEEK Tubing, 0.093" ID, 0.125" OD, 0.016" Wall, 3' Length

Detail Reviews

May 26, 2011 17:04:40

Stainless Steel 304 Hypodermic Tubing, 26 Gauge, 0.018" OD, 0.01" ID, 0.004" Wall, 36" Length

Stainless Steel 304 Hypodermic Tubing, 26 Gauge, 0.018" OD, 0.01" ID, 0.004" Wall, 36" Length Reviews

Other Picture

Stainless Steel 304 Hypodermic Tubing, 26 Gauge, 0.018" OD, 0.01" ID, 0.004" Wall, 36" Length Feature

• Drawn
• Full Hard Temper
• Stainless Steel Type 304
• Corrosion Resistant
• Tight Tolerances

Type 304 Stainless Steel Full Hard, TIG Welded and Drawn tubing is a hard-tempered, small-bore tubing used to make spacers, needles, guide wire assemblies, cannulas, capillary Tubing etc. and is widely applied in the medical, mechanical, electronic, chemical and aeronautical fields. Commonly called seamless because of its cosmetic appearance, Hypodermic Tubing 304 is actually welded and drawn. Full hard, but can be annealed in an inert atmosphere. The annealing point is 1950 degree F 1065 degree C. The dimensional tolerance is uniform over the piece length. Hypodermic Tubing gauges are based on the Birmingham Gage, also known as Stubs Iron Wire Gage. Bright finish.

Visit Store Now !!

Detail Products

• Stainless Steel 316 Hypodermic Round Tubing, 13 Gauge, 0.0950" OD, 0.071" ID, 0.012" Wall, 60" Length
• SuperElastic Nitinol (56% Nickel, 44% Titanium) Wire, Straightened, 0.005" Diameter, 36" Length (Pack of 5)
• Translucent Amber Miniature Polyimide Tubing, 38 AWG, 0.0040" ID, 0.0055" OD, 0.00075" Wall, 12" Length (Pack of 2)
• Stainless Steel 304V Wire, Precision Ground, Straightened (Vacuum-Arc Remelt), 0.030" Diameter, 60" Length (Pack of 5)
• Brass C260 Seamless Round Tubing, 5/32" OD,0.128"ID, 0.014" Wall, 36" Length

Detail Reviews

May 25, 2011 08:14:04

Tan Tygon Pharmed BPT Tubing, 1/4" ID, 1/2" OD, 1/8" Wall, 25' Length

Tan Tygon Pharmed BPT Tubing, 1/4" ID, 1/2" OD, 1/8" Wall, 25' Length Reviews

Other Picture

PharMed BPT Tubing is for use in peristaltic pumps and is less permeable to gases and vapors than silicone tubing. It is ideal for cell culture, fermentation, synthesis, separation, purification and process monitoring and control. PharMed BPT tubing is ideal for use in clean-in-place and steam-in-place cleaning and sterilization systems. It is compatible with virtually all commercial cleaners and sanitizers and can be repeatedly autoclaved for up to five cycle times, without affecting overall service life.

Visit Store Now !!

Detail Products

• Clear Tygon Micro Bore PVC Tubing, 0.020" ID, 0.060" OD, 0.020" Wall, 25' Length

Detail Reviews

May 23, 2011 21:55:04

Stainless Steel 304 Seamless Round Tubing, 1/4" OD, 0.18" ID, 0.035" Wall, 36" Length

Stainless Steel 304 Seamless Round Tubing, 1/4" OD, 0.18" ID, 0.035" Wall, 36" Length Reviews

Other Picture

Stainless Steel 304 Seamless Round Tubing, 1/4" OD, 0.18" ID, 0.035" Wall, 36" Length Feature

• Seamless construction for smoother interior flow
• ASTM A-269
• Annealed
• Stainless Steel Type 304 provides very good corrosion resistance
• Metric

A general purpose annealed round, seamless stainless steel type 304 tubing with industrial finish. ASTM A-281

Visit Store Now !!

Detail Products

• Stainless Steel 316L Seamless Round Tubing, 5/8" OD, 0.459" ID, 0.083" Wall, 60" Length
• Stainless Steel 304 Hypodermic Round Tubing, 25 Gauge, 0.0203" OD, 0.01" ID, 0.005" Wall, 60" Length (Pack of 5)
• Stainless Steel 304L Welded Round Tubing, 3/8" OD, 0.319" ID, 0.028" Wall, 36" Length
• Stainless Steel 316L Welded Round Tubing, 1/2" OD, 0.402" ID, 0.049" Wall, 72" Length
• Stainless Steel 303 Round Rod, ASTM-A582, 1/4" OD, 72" Length

Detail Reviews

May 22, 2011 16:27:05

Zeus PTFE (Teflon) Tube Thin Wall 0 Gauge 50' Length Coil or Spool

Zeus PTFE (Teflon) Tube Thin Wall 0 Gauge 50' Length Coil or Spool Reviews

Other Picture

Zeus PTFE (Teflon) Tube Thin Wall 0 Gauge 50' Length Coil or Spool Feature

• Biocompatible USP Class VI
• Flame Resistant UL 94 VO
• -454 to 500 Degrees
• Limiting Oxygen Index Greater Than 95
• ETO and Autoclave Sterilizable

PTFE (Polytetrafluoroethylene), Sometimes referred to as Teflon is lightweight, semi flexible, and is used for a variety of laboratory applications. Heat resistant to 500 Degrees F (260 Degrees C) continuous. Highly valued for its toughness and insulating qualities, as well as high dielectric strength over a wide range of frequencies.ETO and Autoclave sterilization. Non absorbent to water and unaffected by acids and alkali's. Should not be heated to temperatures above 752 Degrees F (400 Degrees C). Color: White Translucent Natural.

Visit Store Now !!

Detail Products

Detail Reviews

May 21, 2011 17:52:03

Mylar Polyester Heat Shrink Tubing .875" ID x .006" Wall x 12" Length

Mylar Polyester Heat Shrink Tubing .875" ID x .006" Wall x 12" Length Reviews

Other Picture

Mylar Polyester Heat Shrink Tubing .875" ID x .006" Wall x 12" Length Feature

• Dielectric Strength - VPM min..3,000
• Temperature Range - Degrees C -60 to +150
• Melting Point - DegreesC ..above 245
• Dielectric Constant 3.5 to 3.9

A superior, high dielectric insulating tubing that is shrinkable as much as 50 Percent in order to provide an immovable, tight fit. Temperature requirements are approximately 90 DegreesC. for shrinking purposes with a heat cycle as short as 1 second. May be shrunk by various methods such as heat guns, boiling water, electrical coil heaters or in ovens. Heat shrinkable Mylar (R) tubing has a dielectric strength far exceeding other shrinkable materials. It is extremely tough and forms an excellent mechanical barrier. It can be used at both low and high temperatures. It is moisture & vapor resistant and is unaffected by oils, greases and volatile aromatics. Suggested uses are Capacitor covers, RF & IF coil insulation, varnish masking, roller covers, lead binding & holding, battery covers, color coding, insulation between coils, sleeving insulation over wire leads, and protective coverings. Mylar(R) is a DuPont Registered Trademark

Visit Store Now !!

Detail Products

Detail Reviews

May 19, 2011 16:57:15

Black Nylon 12 Flexible Metric Tubing, 4mm ID, 6mm OD, 1mm Wall, 10' Length

Black Nylon 12 Flexible Metric Tubing, 4mm ID, 6mm OD, 1mm Wall, 10' Length Reviews

Other Picture

Nylon 12 Metric Tubing offers very low moisture absorption and will not become brittle or swell because of water. Excellent resistance to flexural fatigue, tube vibration and movement. Nylon 12 tubing is lightweight and posses outstanding bend radii and pressure ratings. It is also resistant to crushing, abrasion and cracking.

Visit Store Now !!

Detail Products

• Stainless Steel 304 Hypodermic Round Tubing, 25 Gauge, 0.0203" OD, 0.01" ID, 0.005" Wall, 60" Length (Pack of 5)
• Brass C260 Square Tubing, 7/16" x 7/16", 0.028" Wall, 36" Length (pack of 3)
• -228 Buna O-Ring, 70A Durometer, Black, 2-1/4" ID, 2-1/2" OD, 1/8" Width (Pack of 10)
• Stainless Steel 18-8 Machine Screw, Flat Head, Phillips Drive, MIL-SPEC, #8-32, 5/8" Length (Pack of 25)
• Steel Music Wire, Straightened, 0.004" Diameter, 72" Length (Pack of 5)

Detail Reviews

May 18, 2011 07:33:03

Stainless Steel 304 Hypodermic Tubing, 27 Gauge, 0.01625" OD, 0.01025" ID, 0.003" Wall, 12" Length

Stainless Steel 304 Hypodermic Tubing, 27 Gauge, 0.01625" OD, 0.01025" ID, 0.003" Wall, 12" Length Reviews

Other Picture

Stainless Steel 304 Hypodermic Tubing, 27 Gauge, 0.01625" OD, 0.01025" ID, 0.003" Wall, 12" Length Feature

• Drawn
• Full Hard Temper
• Stainless Steel Type 304
• Corrosion Resistant
• Tight Tolerances

Type 304 Stainless Steel Full Hard, TIG Welded and Drawn tubing is a hard-tempered, small-bore tubing used to make spacers, needles, guide wire assemblies, cannulas, capillary Tubing etc. and is widely applied in the medical, mechanical, electronic, chemical and aeronautical fields. Commonly called seamless because of its cosmetic appearance, Hypodermic Tubing 304 is actually welded and drawn. Full hard, but can be annealed in an inert atmosphere. The annealing point is 1950 degree F 1065 degree C. The dimensional tolerance is uniform over the piece length. Hypodermic Tubing gauges are based on the Birmingham Gage, also known as Stubs Iron Wire Gage. Bright finish.

Visit Store Now !!

Detail Products

• Stainless Steel 316 Hypodermic Round Tubing, 13 Gauge, 0.0950" OD, 0.071" ID, 0.012" Wall, 60" Length
• SuperElastic Nitinol (56% Nickel, 44% Titanium) Wire, Straightened, 0.028" Diameter, 72" Length (Pack of 1)
• Translucent Amber Miniature Polyimide Tubing, 19 AWG, 0.0359" ID, 0.0379" OD, 0.0010" Wall, 30" Length
• Stainless Steel 304V Wire, Precision Ground, Straightened (Vacuum-Arc Remelt), 0.062" Diameter, 60" Length (Pack of 1)
• Stainless Steel 316 Hypodermic Tubing, 20 Gauge, 0.0355" OD, 0.0235" ID, 0.006" Wall, 60" Length

Detail Reviews

May 17, 2011 04:41:03

PVC NSF-61 Rectangular Tubing, Gray, 2-3/4" X 1-3/8", 0.098 Wall , 6" Length

PVC NSF-61 Rectangular Tubing, Gray, 2-3/4" X 1-3/8", 0.098 Wall , 6" Length Reviews

Other Picture

PVC NSF-61 Rectangular Tubing, Gray, 2-3/4" X 1-3/8", 0.098 Wall , 6" Length Feature

• Corrosion Resistant
• Limited Solvent Bondability
• Excellent Wet Applications
• Agricultural and Marine
• NSF 1,14 & 61, UL94 VO

These PVC rectangle profiles are corrosion resistant and heat resistant to 158F. These profiles are used for light structural duty in wet industrial environments, agricultural settings, and in the marine industry. Excellent corrosion resistance makes them an ideal material to use in plants handling various chemicals where metal can be replaced without sacrificing structural integrity. Solvent resistance is limited and not recommended for direct contact.

Visit Store Now !!

Detail Products

Detail Reviews

May 16, 2011 08:35:05