Blue Polyethylene (LLDPE) Tubing, 0.170" ID, 0.250" OD, 0.040" Wall, 25' Length

Blue Polyethylene (LLDPE) Tubing, 0.170" ID, 0.250" OD, 0.040" Wall, 25' Length Reviews

Other Picture

Linear Low Density Polyethylene(LLDPE) Tubing offers enhanced resistance to stress cracking. Chemically inert; forms a good barrier to gases, vapors, and moisture. Does not impart a taste or odor. Made from non-toxic, 100 percent virgin-grade raw materials conforming to FDA standards. Low density is listed by the National Sanitation Foundation (NSF 51). Flexible, lightweight, durable and good dielectric properties.

Visit Store Now !!

Detail Products

• Red Nylon 12 Flexible Tubing, 0.117" ID, 0.188" OD, 0.035" Wall, 10' Length
• Black Polyethylene (LLDPE) Tubing, 0.170" ID, 0.250" OD, 0.040" Wall, 100' Length
• Steel Cotter Pin, 7/16" Diameter, 4" Length (Pack of 5)
• Stainless Steel 304 Hypodermic Round Tubing, 24 Gauge, 0.0223" OD, 0.014" ID, 0.004" Wall, 60" Length
• Alloy Steel Socket Cap Screw, Flat Head, Hex Socket Drive, 5/16"-18, 1" Length (Pack of 25)

Detail Reviews

Mar 01, 2011 02:07:05

Zeus FEP Heat Shrink Tubing, 4 Gauge, 0.011" Wall, Heat Shrink Rat 1.13:1 48" Length

Zeus FEP Heat Shrink Tubing, 4 Gauge, 0.011" Wall, Heat Shrink Rat 1.13:1 48" Length Reviews

Other Picture

Zeus FEP Heat Shrink Tubing, 4 Gauge, 0.011" Wall, Heat Shrink Rat 1.13:1 48" Length Feature

• Tensile Strength, psi at 73 Deg F 3,000 - 4,000
• Elongation at 73 Deg F .300 percent
• Specific Gravity 2.12 - 2.17
• Shrink ratio is 1.3 to 1
• Maximum continuous operating temp. 500 F

This heat shrinkable FEP (Fluorinated Ethylene-Propylene) Tubing will shrink rapidly over inserted objects upon exposure to moderate heat. Soldered joints, parts, components and fittings of plastic, metal or wood that could not previously be protected because of the high temperature required for shrinkage can now have a transparent surface of Teflon with a continuous service temperature of 400 F (204 C). Shrinkage will occur completely at exposure to 350 F (177 C) with partial shrinkage beginning as low as 200 F (93 C). Suggested for connecting metal, glass or plastic tubes of similar or dissimilar diameters in low pressure applications. FEPs chemical resistance and dielectric properties are equal to PTFE (Polytetrafluoroethylene).

Visit Store Now !!

Detail Products

Detail Reviews

Feb 27, 2011 19:15:03

Clear Tygon S-50-HL Medical Tubing, 3/8" ID, 5/8" OD, 1/8" Wall, 50' Length

Clear Tygon S-50-HL Medical Tubing, 3/8" ID, 5/8" OD, 1/8" Wall, 50' Length Reviews

Other Picture

Tygon S-50-HL Medical Surgical Tubing was originally developed for use in cardiac surgery. The consistent quality provides dependable performance in medical device applications. It has been fully tested for biological safety to the ISO 10993 standard. Durometer hardness: Shore A 66. Tygon Medical/Surgical Tubing can be sterilized by radiation, ethylene oxide, steam or chemical methods. Flexible and resilient with established performance in peristaltic pump applications.

Visit Store Now !!

Detail Products

• Clear Tygon B-44-3 Beverage Tubing, 3/16" ID, 1/4" OD, 1/32" Wall, 10' Length
• Clear Tygon R3603 Laboratory Tubing, 1/16" ID, 1/8" OD, 1/32" Wall, 50' Length
• Clear Tygon Micro Bore PVC Tubing, 0.040" ID, 0.070" OD, 0.015" Wall, 10' Length
• Translucent Tygon Versilic SPX-50 Silicone Tubing, 3/8" ID, 1/2" OD, 1/16" Wall, 10' Length
• Polyurethane Clear Tubing, 1/16" ID x 1/8" OD x 1/32" W, Working Pressure: 134 PSI 100' Length

Detail Reviews

Feb 26, 2011 21:19:05

Stainless Steel 304 Hypodermic Round Tubing, 29 Gauge, 0.0133" OD, 0.008" ID, 0.0025" Wall, 60" Length

Stainless Steel 304 Hypodermic Round Tubing, 29 Gauge, 0.0133" OD, 0.008" ID, 0.0025" Wall, 60" Length Reviews

Other Picture

Stainless Steel 304 Hypodermic Round Tubing, 29 Gauge, 0.0133" OD, 0.008" ID, 0.0025" Wall, 60" Length Feature

• Welded and drawn construction
• Full Hard Temper
• Stainless Steel Type 304 provides very good corrosion resistance
• Tight Tolerances

Type 304 Stainless Steel Full Hard, TIG Welded and Drawn tubing is a hard-tempered, small-bore tubing used to make spacers, needles, guide wire assemblies, cannulas, capillary tubing and other products. It is widely applied in the medical, mechanical, electronic, chemical and aeronautical fields. Commonly called seamless because of its cosmetic appearance, Hypodermic Tubing 304 is actually welded and drawn. Full hard, but can be annealed in an inert atmosphere. The annealing point is 1950 degree F 1065 degree C. The dimensional tolerance is uniform over the piece length. Hypodermic Tubing gauges are based on the Birmingham Gage, also known as Stubs Iron Wire Gage. Bright finish.

Visit Store Now !!

Detail Products

• Stainless Steel 316 Hypodermic Round Tubing, 15 Gauge, 0.0720" OD, 0.054" ID, 0.009" Wall, 60" Length
• Stainless Steel 316 Hypodermic Tubing, 20 Gauge, 0.0355" OD, 0.0235" ID, 0.006" Wall, 60" Length
• SuperElastic Nitinol (56% Nickel, 44% Titanium) Wire, Straightened, 0.028" Diameter, 72" Length (Pack of 1)
• Translucent Amber Miniature Polyimide Tubing, 36 AWG, 0.0050" ID, 0.0095" OD, 0.00225" Wall, 30" Length
• Brass C260 Square Tubing, 1/4" x 1/4", 0.014" Wall, 36" Length (Pack of 3)

Detail Reviews

Feb 26, 2011 00:27:04

Cole-Parmer pump oil, 58 cSt, 1 gallon

Cole-Parmer pump oil, 58 cSt, 1 gallon Reviews

Other Picture

Cole-Parmer pump oil, 58 cSt, 1 gallon Feature

• Cole-Parmer Vacuum Pump Oil
• Type: CP 20
• Volume: 1 gal. (3785 mL)
• Brand: Cole-Parmer
• Vapor pressure: 3 x 10 -6 torr at 25ºC
• Viscosity: 58 cSt
• Manufacturer number: CP20 GAL (INVOIL 20)
• Part Number: AO-79755-22
• Package Quantity: GALLON of 1

Cole-Parmer vacuum pump oil is formulated to ensure good performance and long pump life. CP 500 is a general-purpose high-viscosity oil. Use CP 19 in direct drive pumps to resist gum formation and oxidation. CP 20 exhibits a low vapor pressure and resists oxidation and thermal degradation-ideal for mechanical vacuum pumps. All types have a specific gravity of 0.86 g/mL.

Visit Store Now !!

Detail Products

Detail Reviews

Feb 24, 2011 23:34:04

White Translucent Nylon 101 Round Tubing, 1/2" OD, 3/8" ID, 24" Length

White Translucent Nylon 101 Round Tubing, 1/2" OD, 3/8" ID, 24" Length Reviews

Other Picture

White Translucent Nylon 101 Round Tubing, 1/2" OD, 3/8" ID, 24" Length Feature

• Nominal Tolerances: O.D. on plus side up to .040"
• Nominal Tolerances: I.D. on minus side up to .040"

Nylon's combination of mechanical properties, excellent wear, abrasion resistance and weight, make it an excellent replacement for metals and bronze parts. Nylon is 1/8 the weight of bronze, yet it is easier to handle and maintain than metals. Nylon has a proven record of outstanding service in a wide range of parts for all industries. It is easy to fabricate using standard metal working equipment.

Visit Store Now !!

Detail Products

Detail Reviews

Feb 24, 2011 03:33:04

Black Nylon 12 Flexible Tubing, 0.117" ID, 0.188" OD, 0.035" Wall, 250' Length

Black Nylon 12 Flexible Tubing, 0.117" ID, 0.188" OD, 0.035" Wall, 250' Length Reviews

More Picture

Nylon 12 Flexible Tubing offers very low moisture absorption and will not become brittle or swell because of water. Excellent resistance to flexural fatigue, tube vibration and movement. Nylon 12 tubing is lightweight and posses outstanding bend radii and pressure ratings. It is also resistant to crushing, abrasion and cracking.

Go tO Store Now !!

More Products

• Natural Nylon 12 Flexible Tubing, 0.375" ID, 0.500" OD, 0.063" Wall, 10' Length
• Black Nylon 12 Flexible Metric Tubing, 4mm ID, 6mm OD, 1mm Wall, 10' Length
• Eureka 71B Hand-Held Vacuum

More Reviews

Feb 23, 2011 04:21:03

Zeus PTFE (Teflon) Regular Wall Tubing 21 Gauge 50' Length Spool or Coil

Zeus PTFE (Teflon) Regular Wall Tubing 21 Gauge 50' Length Spool or Coil Reviews

More Picture

Zeus PTFE (Teflon) Regular Wall Tubing 21 Gauge 50' Length Spool or Coil Feature

• Biocompatible USP Class VI
• Flame Resistant UL 94 VO
• -454 to 500 Degrees
• Limiting Oxygen Index Greater Than 95
• ETO and Autoclave Sterilizable

PTFE (Polytetrafluoroethylene), Sometimes referred to as Teflon is lightweight, semi flexible, and is used for a variety of laboratory applications. Heat resistant to 500 Degrees F (260 Degrees C) continuous. Highly valued for its toughness and insulating qualities, as well as high dielectric strength over a wide range of frequencies.ETO and Autoclave sterilization. Non absorbent to water and unaffected by acids and alkali's. Should not be heated to temperatures above 752 Degrees F (400 Degrees C). Color: White Translucent Natural.

Go tO Store Now !!

More Products

• Zeus PTFE (Teflon) Regular Wall Tubing 23 Gauge 50' Length Spool or Coil
• Zeus PTFE (Teflon) Regular Wall Tubing 17 Gauge 50' Length Spool or Coil

More Reviews

Feb 21, 2011 11:15:05

Aluminum 6063-T52 Round Tubing, 1.25" OD, 1" ID, 0.125" Wall, 36" Length

Aluminum 6063-T52 Round Tubing, 1.25" OD, 1" ID, 0.125" Wall, 36" Length Reviews

More Picture

Aluminum 6063-T52 Round Tubing, 1.25" OD, 1" ID, 0.125" Wall, 36" Length Feature

• Good resistance to general corrosion
• Easily welded or brazed
• Use for door and window frames, electrical components and conduit, railings and furniture, heatsinks
• Good extrudability and high quality surface finish
• Min 22 ksi tensile strength

Alloy 6063, one of the most popular alloys in the 6000 series, provides good extrudability and a high quality surface finish. In the heat-treated condition, alloy 6063 provides good resistance to general corrosion, including resistance to stress corrosion cracking. It is easily welded or brazed by various commercial methods (caution: direct contact by dissimilar metals can cause galvanic corrosion). Since 6063 is a heat-treatable alloy, strength in its -T6 condition can be reduced in the weld region. Selection of an appropriate filler alloy will depend on the desired weld characteristics. Consult the Material Safety Data Sheet (MSDS) for proper safety and handling precautions when using alloy 6063. Alloy 6063 offers excellent response for anodizing in its -T5, -T52 , -T53 (“matte finish”), -T54, -T6 (“lustrous” finish) tempers. The most common methods are clear, clear and color dying, and bright dipping and hard coat. Bright dipping provides an economical alternative to mechanical polished finishes while offering improved surface durability.

Go tO Store Now !!

More Products

More Reviews

Feb 20, 2011 12:16:03

Translucent Tygon Tygoprene Tubing, 1/2" ID, 3/4" OD, 1/8" Wall, 5' Length

Translucent Tygon Tygoprene Tubing, 1/2" ID, 3/4" OD, 1/8" Wall, 5' Length Reviews

More Picture

This tubing was designed specifically for peristaltic pump applications and has a pump life over 500 hours. It is extremely flexible and exhibits superior flex life, reducing downtime due to tubing failure. Tygoprene can also be used as a substitute to silicone and PVC where longer pump life is required. Tygoprene tubing is translucent and has excellent chemical resistance to a wide range of fluids including acids and bases. This tubing remains flexible at -40 F and is temperature resistant to 250 F. Tygoprene pump tubing complies with FDA CFR 2:1,177.12:10 criteria for food contact applications; is NSF listed under standard 51 and has also passed the UL 94-HB flammability resistance classification. Tygoprene tubing has low extractable making it ideal for applications like ink transfer, soap and detergent delivery. It also does not impart taste to fluids making it an excellent choice for cold or hot beverage delivery and food transfer. It is also used for general chemical transfer and laboratory applications requiring long pump life and/or low extractable.

Go tO Store Now !!

More Products

• White SiliconeTubing, 3/8"ID, 1/2"OD, 1/16" Wall, 10' Length
• Translucent Tygon Versilic SPX-50 Silicone Tubing, 3/8" ID, 1/2" OD, 1/16" Wall, 10' Length
• -227 Silicone O-Ring, 70A Durometer, Red, 2-1/8" ID, 2-3/8" OD, 1/8" Width (Pack of 10)
• Dremel 300-1/24 300 Series Variable-Speed Rotary Tool Kit
• Neiko Titanium Step Drill Bit - 1/4" to 1-3/8" in 1/8" Increments, 10 Steps

More Reviews

Feb 19, 2011 13:21:03